PRC

Aluminum Camber Rod End Assembly

Type a description for this product here...

L7.5 Caster Block (Triton/Recon) - LF

Phantom's 7.5 degree KPI left side caster block. Recommended for Triton, Triton Jr, & Recon chassis. ***DOES NOT FIT Nemesis or Phenom chassis***

PRC 1/4-Turn Dzus Fastener Complete Body Bolt Kit

The 1/4-turn dzus fasteners make mounting and removing your body fast and easy. By a simple turn of the wrist with a 3/16" allen wrench, the 1/4-turn dzus fasteners may be loosened or tightened with...

PRC Caster Block Safety Pin Assembly

This safety pin assembly comes with all of the parts necessary to properly secure both your left and right caster blocks to your chassis.

PRC Accutoe Steering Lock Kit

Setting toe is a crucial part in the set-up process. This steering lock kit allows you to lock the steering in order to set toe. Mounts directly to your steering shaft.

PRC Rivet-in Seat Washer Set

PRC's new "Rivet-in Seat Washers" directly replace the old 5/16" standard flat washers. These new washers rivet directly in your seat to prevent your mounting bolts from wearing out the holes drilled...

Long Nerf Bar Pin Assembly (Recon)

Long Nerf Bar Pin Assembly (Recon)

PRC Nerf Bar Pin Assembly

The essential hardware to "pin" both left and right nerf bars on your Phantom chassis.

PRC Seat Strut Mounting Bolt Kit

The essential bolts and luck nuts to fasten both the left and right seat struts to your chassis.

PRC 1/4" x 3/16" x 2" Chrome Axle Key (Short)

1/4" x 3/16" x 2" Chrome Axle Key (Short)

LONG Camber Rod End Assembly (Steel Only)

"Long" camber rod assembly. For use on the MINecon chassis with the caster block spacer installed.

PRC NeXgen Seat

PRC NeXgen Seat After several years of tremendous success with the Select Seat, Harrill and his crew went back to the drawing board to revamp their line of fiberglass seats and make them better...